Pneumatic pump problems Compressed air dryers Oil coalescing solutions Air oil separators Compressed air system Air line filter solution Pneumatic pumps Air compressor auto drain Air piping system
Airid's Pneumatic Pumps Eliminate Compressed Air Piping Loss, Prevents Costly Drain Malfunction.
Airid's piston pneumatic pump technology is unbeatable everywhere oil and compressed air piping is a problem! Positive pneumatic operation, internal, easy to clean purification strainers and patented dual-stage liquid ejection system deliver reliable, efficient operation by preventing drain clogs and open/shut errors. Available line heaters (115 VAC and 12 or 24 VDC) prevent freeze-ups.
How Do The Pneumatic Pumps Work? Signal air pushes the piston forward, unseating the ball. Strained liquids are forced into the tank, which is filled with atmospheric air. Forced liquids compress the air in the tank; signal air is discontinued, forcing the piston into reverse, seating the ball and sealing off the inlet. The liquid outlet is now open in piston reverse and was closed position forward, eliminating the loss of compressed air. (Compressed air is only used in piston forward!)
Our Pneumatic Pump - The Answer To Your Problems: Construction of the pump body and piston is 6061T6 Hard Navy Mil., Spec anodized aluminum; Stainless steel ball, piston rod, strainers and tank, and atmospheric inlet; Teflon and viton seals.
Total System Compatibility: Airid's piston pneumatic pumps fit all Airid coalescer / filters and cool air dryers; receiver surge and accumulator tanks; separators, and drip-leg drain kits. All air pumps cam be cycled by Airid electro-pneumatic controls, multiple electro-pneumatic control, or total pneumatic control; Unloader lines or a cyclic application discharges the used air to pistons.
Discharge Rates Fluid Oz./Hour and Gallons/Hour at 90 PSI.
|Signal Air Cycle||12 Sec.||30 Sec.||1 Min.||2 Min.||5 Min.||10 Min.||15 Min.|
|Airid Moisture Minder 1||Fl. Oz.||750||300||150||75||30||15||10|
|Airid Moisture Minder 2||Fl. Oz.||200||80||40||20||8||4||2|
|Airid Moisture Minder 3000||Fl. Oz.||3412||1365||682||341||136||68||45|
Home | Company | Products | Contact Us
CONTACT US AT:
digilube systems, inc.
216 East Mill Street; Springboro, Ohio 45066; USA
1-937-748-2209 or 1-800-837-5667 phone, 1-937-748-0597 fax
Only for problems with the website ==> email@example.com
© 2009 by Digilube, Inc. located south of Dayton, Ohio U.S. All rights reserved.
Highest Search Engine Ranking